LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Power Door Locks & Keyless Entry) >> Component Tests >> Sliding Door Lock-Link Switch Inspection >> With Theft-Deterrent System

With Theft-Deterrent System

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The sliding door lock-link switch is together with the sliding door lock actuator.
  1. Disconnect the sliding door lock actuator connector.
  2. Inspect for continuity between the sliding door lock-link switch terminals using an ohmmeter.
    • If not as specified, replace the sliding door lock actuator.
Fig 1: Inspecting Sliding Door Lock Actuator Continuity
G01196452Courtesy of MAZDA MOTORS CORP.
Fig 2: Identifying Sliding Door Lock Actuator Terminals
G01196453Courtesy of MAZDA MOTORS CORP.