Sliding Door Lock Actuator Inspection

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the sliding door lock actuator connector.
Apply battery positive voltage to the sliding door lock actuator terminals and inspect the operation of the sliding door lock actuator.
- If not as specified, replace the sliding door lock actuator.

Fig 1: Sliding Door Lock Actuator Lock Operation

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Sliding Door Lock Actuator Terminals

Courtesy of MAZDA MOTORS CORP.