Front Door Lock-Link Switch Inspection

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The front door lock-link switch is together with the front door lock actuator.

Disconnect the front door lock actuator connector.
Inspect for continuity between the front door lock-link switch terminals using an ohmmeter.
- If not as specified, replace the front door lock actuator.

Fig 1: Inspecting Front Door Lock-Link Switch Continuity (Driver's Side)

Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Front Door Lock-Link Switch Continuity (Passenger's Side With Theft-Deterrent System)

Courtesy of MAZDA MOTORS CORP.

Fig 3: Identifying Front Door Lock-Link Switch Connector Terminals

Courtesy of MAZDA MOTORS CORP.