Removal and Installation

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Rear Pivot Arm

Courtesy of MAZDA MOTORS CORP.

Remove the pivot arm.
1. Lift pivot arm to the upright position.
2. Slide the locking tab out.
3. Pull up and remove the pivot arm.
To install, reverse the removal procedure.
1. Adjust the windshield wiper pivot arm. For additional information, refer to REAR WINDOW WIPER BLADE AND PIVOT ARM ADJUSTMENT .