LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - System/Component Tests - 2.3L) >> Engine Sensors & Switches >> Transmission Range Switch (A/T)

Transmission Range Switch (A/T)

WARNING: This page is about a different car, the 1997 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for starter operation with ignition switch in START position and shift lever in "P" and "N" position only. Ensure back-up lights illuminate with ignition in ON position and selector lever in "R".
  2. To test switch, disconnect transmission range switch connector. Check for continuity between specified terminals at transmission range switch. See Fig 1 . If continuity is not as specified, replace switch.
Fig 1: Checking Transmission Range Switch
G96F30580Courtesy of MAZDA MOTORS CORP.