LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - System/Component Tests - 2.3L) >> Emission Systems & Sub-Systems >> Exhaust Gas RECIRCULATION (EGR) System >> EGR Vacuum Solenoid Valve

EGR Vacuum Solenoid Valve

WARNING: This page is about a different car, the 1997 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.

Remove EGR vacuum solenoid. See EGR VACUUM/VENT SOLENOID VALVE LOCATIONS  table. Apply air pressure to a solenoid valve port. See Figure . Air should not flow from other solenoid port. Using jumper wire, apply battery voltage to solenoid valve terminals. Air should flow with voltage applied. If solenoid valve does not operate as specified, replace valve.

scientia non olet · About LEMON Manuals