LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Engine Controls [Removal & Installation]) >> Variable Valve Timing System >> Variable Valve Timing Actuator >> Removal & Installation (Miata)

Removal & Installation (Miata)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Disconnect Oil Control Valve (OCV) harness connector. See Fig 1.
  3. Remove OCV. See Fig 1.
  4. To install, reverse removal procedure. See TORQUE SPECIFICATIONS .
Fig 1: Removing & Installing Oil Control Valve - Miata
G00264425Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals