Installation (B3000)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Failure to install the TP sensor in this manner may result in excessive idle speeds.
- Slide the rotary tangs into position over the throttle shaft blade, then rotate the TP sensor.
- To complete installation, reverse remaining removal procedures. See TORQUE SPECIFICATIONS .