Removal & Installation (B2300)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Pull back the Cylinder Head Temperature (CHT) sensor cover and disconnect the harness connector. See Fig 1.
Remove the CHT sensor. See Fig 2.
To install, reverse removal procedure. See TORQUE SPECIFICATIONS .

Fig 1: Locating CHT Sensor Harness Connector - B2300

Courtesy of MAZDA MOTORS CORP.

Fig 2: Removing & Installing CHT Sensor - B2300

Courtesy of MAZDA MOTORS CORP.