Removal & Installation (Tribute 3.0L)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2003 Mazda Tribute, 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Numbers in parenthesis refer to numbers in the illustration.

Disconnect the crankcase vent hose (1). See Fig 1.
Loosen the screw clamps (2). See Fig 1.

NOTE: The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.

To install, reverse removal procedure. See TORQUE SPECIFICATIONS .

Fig 1: Removing & Installing Air Filter Outlet Pipe - Tribute (3.0L)

Courtesy of MAZDA MOTORS CORP.