Evaporative Chamber - Miata Only

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, 2003 Mazda MPV, and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove evaporative chamber. For location, see Figure. Blow air into port "A" and verify there is airflow from port "B". See Fig 1. If airflow is not present at port "B", replace evaporative chamber.

Fig 1: Identifying Evaporative Chamber Test Ports (Miata)

Courtesy of MAZDA MOTORS CORP.