LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Engine Controls [System & Component Testing]) >> Emission Systems & Sub-Systems >> Fuel Evaporative System (Protege & Protege5) >> Charcoal Canister

Charcoal Canister

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2003 Mazda MX-5 Miata, 2003 Mazda MPV, and 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not apply more than 2.8 psi to charcoal canister. Will damage charcoal canister.

Remove charcoal canister, located under vehicle at spare tire well and disconnect hoses. See Figure. Plug charcoal canister ports "A" and "C" and apply small amount of air pressure to canister port "B". See Fig 1. If any air leaks are present, replace charcoal canister.

Fig 1: Identifying Charcoal Canister Ports - Protege & Protege5
G00110089Courtesy of MAZDA MOTORS CORP.