LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls [Self-Diagnostics 3.0L]) >> Diagnostic Tests >> DTC P0340: Right Side Camshaft Position Sensor Circuit - Malfunction >> Detection Condition

Detection Condition

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

The PCM monitors input voltage from right side Camshaft Position (CMP) sensor when engine is running. If PCM does not receive input voltage from right side CMP sensor while PCM receives input signal from Crankshaft Position (CKP) sensor, PCM determines CMP circuit has a malfunction. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition during first drive cycle. PENDING CODE is available if PCM detects malfunction condition. FREEZE FRAME DATA is available. DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals