Rear Deck Lock
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the screw and open the lock cover.
- Loosen the plate installation bolts.
- Install the detachable hardtop to the body.
- Move the plate right, left, fore, or aft until it is tight.
- Tighten the plate installation bolts.
Tightening torque
- 18-26 N.m {1.8-2.7 kgf.m, 14-19 ft.lbf}
- Close the lock cover and install the screw.