LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (Exterior Trim) >> BELTLINE Molding Removal/Installation

BELTLINE Molding Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear package trim.
  2. Remove the set plate.
  3. Remove the bolts.
  4. Remove the beltline molding.
    Fig 1: Removing Beltline Molding
    G03638805Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals