LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 530 (Body Panels) >> Trunk Lid Adjustment >> Tension

Trunk Lid Adjustment: Tension

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide the balance spring to the desired position as described below using a tape-wrapped screwdriver.
    Fig 1: Adjusting Tension
    G03638687Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • The trunk lid should rise 50-300 mm {2.0-11.8 in} when the trunk lid is unlocked.
    SET POSITIONS TENSION REFERENCE

    Tension Hook bracket Set position
    a b
    Standard Right side (1)  
    Left side   (1)
    Increase Right side (1)  
    Left side (1)  
    Decrease Right side   (1)
    Left side   (1)
    (1) Position
scientia non olet · About LEMON Manuals