Inspection Procedure
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Follow the steps below to verify that the SST
(Deployment Tool) is operating correctly.
- If not as specified, do not use the SST (Deployment Tool) because it may cause the air bag module to unexpectedly deploy upon connection to the air bag module.
INSPECTION PROCEDUREStep Inspection procedure Light condition Green Red 1 Connect red clip to positive battery terminal and black clip to negative battery terminal. On Off 2 Connect connectors A and B of SST (Deployment Tool). Off On 3 Press activation switch. On Off