LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 520 (Automatic Transmission [Service, Removal & Installation]) >> Solenoid Valves Inspection >> Operating Inspection

Operating Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the solenoid valves. (See SOLENOID VALVES REMOVAL/INSTALLATION .)
  3. Apply the voltage at terminal and listen for a ' "click" sound at all solenoid valves.
    • If a "click" is not heard, replace the solenoid valve.
  4. Install the solenoid valves. (See SOLENOID VALVES REMOVAL/INSTALLATION .)
  5. Connect the solenoid valve connector.
  6. Connect the negative battery cable.
    Fig 1: Inspecting Solenoid Valve Operation
    G03638396Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals