No. 2 Vehicle Moves In N Position: Notes

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

VEHICLE MOVES IN N POSITION - DESCRIPTION & POSSIBLE CAUSE

2	Vehicle moves in N position
DESCRIPTION	Vehicle creeps in N position. Vehicle creeps if brake pedal is not depressed in N position
POSSIBLE CAUSE	If the vehicle moves in N position, basically, the malfunction is in the automatic transmission. Since a malfunction in the sensor circuit or output circuit is the cause of the malfunction in the automatic transmission, inspect the sensor, output circuit, and the related harnesses. Clutch is burned. (Move forward: Forward clutch, one-way clutch No. 0, one-way clutch No. 2, Move backward: Direct clutch, reverse brake, one-way clutch No. 0) Line pressure is low Control valve body malfunction Selector lever position disparity NOTE: Before following the troubleshooting steps, make sure that the on-board diagnosis and basic inspection have been conducted.

Vehicle moves in N position

DESCRIPTION

Vehicle creeps in N position.
Vehicle creeps if brake pedal is not depressed in N position

POSSIBLE CAUSE

If the vehicle moves in N position, basically, the malfunction is in the automatic transmission. Since a malfunction in the sensor circuit or output circuit is the cause of the malfunction in the automatic transmission, inspect the sensor, output circuit, and the related harnesses.
1. Clutch is burned. (Move forward: Forward clutch, one-way clutch No. 0, one-way clutch No. 2, Move backward: Direct clutch, reverse brake, one-way clutch No. 0)
  - Line pressure is low
  - Control valve body malfunction
2. Selector lever position disparity
NOTE:
- Before following the troubleshooting steps, make sure that the on-board diagnosis and basic inspection have been conducted.