No. 1 Vehicle Does Not Move In D, 2,1 Ranges, Or In R Position: Notes
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
VEHICLE DOES NOT MOVE IN D, 2,1 RANGES, OR IN R POSITION - DESCRIPTION & POSSIBLE CAUSE
| 1 |
Vehicle does not move in D, 2,1 range, or in R position |
| DESCRIPTION |
- Vehicle does not move when accelerator pedal is depressed
|
| POSSIBLE CAUSE |
- If the vehicle does not move in D, 2,1 ranges or R position, basically, the malfunction is in the automatic transmission. (Vehicle will move even with a malfunction in the PCM. ) Since a malfunction in the sensor circuit or output circuit is the cause of the malfunction in the automatic transmission, inspect the sensors, output circuit, and the related harnesses.
- Clutch slippage, worn (D, 2, 1 ranges-Forward clutch, 4GR clutch, one-way clutch No. 0, one-way clutch No. 2, R position-Reverse brake, 4GR clutch, direct clutch, one-way clutch No. 0)
- Line pressure is low
- Sensor ground malfunction
- Shift solenoid A malfunction
- Shift solenoid B malfunction
- Body ground malfunction
- Control valve body malfunction
- Selector lever malfunction
- Parking mechanism not operating properly.
- Torque converter malfunction
NOTE:
- Before following the troubleshooting steps, make sure that the on-board diagnosis and basic inspection have been conducted.
|