LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 514 (Conventional Brake System) >> Rear Brake (Disc) Inspection >> Disc Pad Thickness Inspection

Disc Pad Thickness Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. On level ground, jack up the rear of the vehicle and support it with safety stands.
  2. Remove the wheels.
  3. Look through the caliper inspection hole and verify the remaining thickness of the pad.

    Thickness 

    1. 2.0 mm {0.08 in} min. 
scientia non olet · About LEMON Manuals