LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 498 (Emission System) >> Purge Solenoid Valve Inspection >> Airflow Inspection

Airflow Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Perform the following test only when directed.
  1. Remove the purge solenoid valve. (See PURGE SOLENOID VALVE REMOVAL/INSTALLATION .)
  2. Inspect airflow between the ports under the following conditions:
    • If as specified, inspect the vacuum hoses for improper routing, kinks or leakage, and carry out "Circuit Open/Short Inspection".
    • If not as specified, replace the purge solenoid valve.
      • Fig 1: Identifying Terminal Airflow
      G03637873Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Connector Terminal
      G03637874Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals