LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 496 (Fuel System) >> Fuel Injector Inspection >> Fuel Leakage and Volume Test >> Using a fuel injector tester

Using a fuel injector tester

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel injectors. (See FUEL INJECTOR REMOVAL/INSTALLATION (+)
  2. Connect the fuel injector to the fuel injector tester.
  3. Measure the injection volume of each fuel injector.
    • If not as specified, replace the fuel injector.

    Injection volume 

    1. 66-82 ml {66-82 cc, 2.3-2.7 fl oz}/15 s. 
  4. Complete the "AFTER SERVICE PRECAUTION". (See AFTER SERVICE PRECAUTION (+)
scientia non olet · About LEMON Manuals