LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 495 (Engine Mechanical [Intake-Air System]) >> Turbocharger WASTEGATE Regulating Valve Inspection (BP With TC) >> Continuity Inspection

Continuity Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the turbocharger wastegate regulating valve. (See VACUUM HOSE ROUTING DIAGRAM (BP WITH TC) .)
    Fig 1: Removing Turbocharger Wastegate Regulating Valve
    G03637792Courtesy of MAZDA MOTORS CORP.
  2. Verify that the airflow is as indicated in the table.
    Fig 2: Verify That Airflow Is As Indicated
    G03637791Courtesy of MAZDA MOTORS CORP.
    • If there is any malfunction, replace the turbocharger wastegate regulating valve.
    • If there is no malfunction, perform the CIRCUIT OPEN/SHORT INSPECTION .