LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 488 (Instrumentation/Driver Info) >> Fuel Gauge Sender Unit Removal/Installation >> Fuel Gauge Sender Unit (Sub) >> Fuel leak inspection after fuel gauge sender unit (sub) installation

Fuel leak inspection after fuel gauge sender unit (sub) installation

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drive the vehicle from a standstill or brake suddenly 5-6 times  at a low speed.
  2. Stop the vehicle and verify that there is no fuel leakage from the fuel tank.
scientia non olet · About LEMON Manuals