LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 485 (Washer System & Wiper System) >> Windshield Washer Motor Removal/Installation

Windshield Washer Motor Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the windshield washer tank. (See WINDSHIELD WASHER TANK REMOVAL/INSTALLATION .)
  3. Remove the windshield washer motor, then remove the grommet.
  4. Install in the reverse order of removal.
    Fig 1: Removing Windshield Washer Motor And Grommet
    G03703347Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals