Seat Back

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
Verify that the continuity between the seat warmer terminals is as indicated in the table.
- If not as indicated in the table, replace the seat warmer unit.
Fig 1: Connector Terminal Continuity Reference Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Measuring Continuity Between Seat Warmer Terminals
Courtesy of MAZDA MOTORS CORP.