LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 473 (Seat Belt System) >> Front Seat Belt Removal/Installation >> Pre-tensioner Seat Belt Connector Removal Note

Pre-tensioner Seat Belt Connector Removal Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a flathead screwdriver, pry out the pre-tensioner seat belt connector stopper plate.
  2. Disconnect the pre-tensioner seat belt connector.
    Fig 1: Disconnecting Pre-Tensioner Seat Belt Connector
    G03702939Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals