LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 467 (Electronic Power Steering System) >> Steering Gear And Linkage Disassembly/Assembly >> Tie-rod End Disassembly Note

Tie-rod End Disassembly Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place alignment marks as shown in the figure for proper installation.
  2. Remove the tie-rod end.
    Fig 1: Placing Alignment Marks On Tie-Rod End
    G03702751Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals