Transmission Oil Inspection

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Position the vehicle on level ground.
Remove oil filler plug.

Fig 1: Removing Oil Filler Plug
Courtesy of MAZDA MOTORS CORP.
Verify that the oil is near the brim of the plug port.
- If the oil is not near the brim of the plug port, add the specified amount and type of oil.
Specified oil grade
1. API Service GL-4
Specified oil viscosity
1. SAE 75W-90
Install oil filler plug and a new washer.
Tightening torque
1. 27-48 N.m {2.8-4.9 kgf.m, 20-35 ft.lbf}