LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 434 (Engine Mechanical [Lubrication System]) >> Metering Oil Pump Inspection >> Metering Oil Pump Resistance Inspection

Metering Oil Pump Resistance Inspection

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the metering oil pump connector (6-pin).
  2. Measure the resistance between terminals D-B, D-F, C-A, and C-E using a tester.
    • If not within the specification, replace the metering oil pump.

    Resistance 

    1. 30.6-35.6 ohms [20°C {68 °F}] 
    Fig 1: Identifying Connector Terminals
    G03701828Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals