LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 423 (Seats) >> Front Seat Disassembly/Assembly >> Passenger's Seat (For Vehicles With The Two-step Deployment Air Bag System) >> Seat weight sensor installation note

Seat weight sensor installation note

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seat weight sensor to the slide adjusters and temporarily tighten the four nuts.
  2. Tighten nuts A (both right and left) at the same time to the specified tightening torque.
  3. Tighten nuts B (both right and left) at the same time to the specified tightening torque.
  4. Install the seat under bracket to the seat weight sensor and temporarily tighten the four nuts.
  5. Tighten nuts C (both right and left) at the same time to the specified tightening torque.
  6. Tighten nuts D (both right and left) at the same time to the specified tightening torque.
scientia non olet · About LEMON Manuals