Driver-Side Air Bag Module: Installation
WARNING: This page is about a different car, the 2002 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
To install driver-side air bag module, reverse removal procedure. Tighten air bag module retaining bolts in sequence. See Fig 1. Tighten air bag module retaining bolts in to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG warning light to ensure system is functioning properly. See SYSTEM OPERATION CHECK .