Deployment Procedure for Inside of Vehicle: Notes
WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the SST (Deployment tool). (See INSPECTION OF SST (DEPLOYMENT TOOL) .)
- Move the vehicle to an open space, away from strong winds, and close all of the vehicle's doors and windows.
- Turn the ignition switch to LOCK position.
- Disconnect the negative battery cable and wait for 1 min or more.
- Follow the appropriate procedure for deploying the driver-side air bag module, passenger-side air bag module, side air bag module, or pre-tensioner seat belt.