LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 419 (Air Bag System) >> Air Bag Module And Pre-TENSIONER Seat Belt Deployment Authorization Procedures (Standard Deployment Control System) >> After Replacing Side Air Bag Sensor

After Replacing Side Air Bag Sensor

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new side air bag sensor.
  2. Turn the ignition switch to ON position.
  3. Verify that the air bag system warning light illuminates for approx. 6 s  and then goes off.
    • If the light stays on, perform the deployment authorization procedure again.
scientia non olet · About LEMON Manuals