LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 413 (Power Steering System) >> Steering Gear And Linkage Assembly >> Oil Seal (Gear Housing) Assembly Note

Oil Seal (Gear Housing) Assembly Note

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil seal in the rack housing using the SSTs  .
  2. After installation, inspect for noise by shaking the gear housing.
    • If there is noise, the seal is not properly installed. Reinstall it.
    Fig 1: Installing Gear Housing Oil Seal
    G03700662Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals