LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 412 (Automatic Transaxle [Shift Mechanism]) >> Key Interlock Solenoid Inspection >> Continuity Inspection

Continuity Inspection

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the column cover.
  3. Disconnect the key interlock solenoid connector.
  4. Inspect for continuity between terminals A and B.
    • If there is no continuity, replace the key cylinder.
  5. Connect the key interlock solenoid connector.
  6. Install the column cover.
  7. Connect the negative battery cable.
    Fig 1: Identifying Key Interlock Solenoid Connector Terminal
    G03700608Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals