No.24 Engine Stalls When Shifted To D, 3, 2 Ranges, Or In R Position: Notes

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE STALLS WHEN SHIFTED TO D, 3, 2 RANGES, OR IN R POSITION - DESCRIPTION AND POSSIBLE CAUSES

24	Engine stalls when shifted to D, 3, 2 ranges, or in R position
DESCRIPTION	Engine stalls when shifting from N or P position to D, 3, 2 ranges or R position at idle.
POSSIBLE CAUSE	Malfunction is on the engine control side (e.g. IAC system). Otherwise, malfunction is in input/turbine speed sensor (engine sometimes starts) or TCC piston circuit (engine always stalls). Before following troubleshooting steps, make sure that Automatic Transaxle On-Board Diagnostic and Automatic Transaxle Basic Inspection are conducted.