Checking for vacuum loss (unloaded condition)
WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Stop the engine when the vacuum gauge reading reaches 66.7 kPa {500 mmHg, 19.7 inHg}. Start the engine.
- Observe the vacuum gauge for 15 seconds.
- If the gauge shows 63.3-66.7 kPa {475-500 mmHg, 18.7-19.6 inHg} , the unit is operating.
- If not, inspect for damage on the check valve or vacuum hose, and examine the installation. Repair if necessary, and inspect it again.