LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 392 (Engine Mechanical [Lubrication System]) >> Oil Pump Removal/Installation >> Notes

Oil Pump Removal/Installation: Notes

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the timing chain. (See TIMING CHAIN REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
  5. Start the engine and inspect for engine oil leakage.
  6. Inspect the oil pressure. (See OIL PRESSURE INSPECTION .)
    Fig 1: Identifying Oil Pump Components
    G03699818Courtesy of MAZDA MOTORS CORP.