Rear Tilt Motor Inspection
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the rear tilt motor connector.
- Apply battery positive voltage to the rear tilt motor terminals and inspect the rear tilt motor operation
- If not as specified, replace the rear tilt motor.
Courtesy of MAZDA MOTORS CORP. MOTOR OPERATION CHART
| Motor operation |
Connection |
| B+ |
GND |
| Up |
A |
B |
| Down |
B |
A |