Torque Converter
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2005 Mazda 6, 2005 Mazda 3, 2004 Mazda 6, 2004 Mazda 3, and 2003 Mazda Protege5. However, it is still accessible from the selected car via links, so may be relevant.
Torque converter is a sealed unit and cannot be disassembled for service. Inspect for damage and cracks. Replace torque converter if defective. Remove any rust from pilot hub and boss of converter. Flush torque converter. After converter is removed from cleaner, thoroughly drain solvent through hub. Add about 0.53 qt. (0.5L) clean ATF to converter. Agitate fluid by hand. Drain ATF from converter.