LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 372 (Refrigerant System [HVAC]) >> Refrigerant System General Procedures >> Manifold Gauge Set Installation

Manifold Gauge Set Installation

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully close the valves of the manifold gauge.
  2. Connect the charging hoses to the high and low-pressure side joints of the manifold gauge.
  3. Connect the quick couplers to the ends of the charging hoses.
  4. Connect the quick couplers to the charging valves.
    Fig 1: Connecting Charging Hoses To High And Low-Pressure Side Joints Of Manifold Gauge
    G03644996Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals