LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mazda
>>
2013
>>
5 Grand Touring
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 366 (Automatic Transaxle [Service, Removal & Installation FN4A-El))
>>
TCM Inspection
>>
Inspection Using an Oscilloscope (Reference)
>>
Shift solenoid C control
>>
Vehicle condition
Vehicle condition
WARNING:
This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
Idle after warm up (engine speed approx. 700 rpm, no load, P/S off, A/C off)
Fig 1: Identifying Shift Solenoid C Pattern
Courtesy of MAZDA MOTORS CORP.