LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Automatic Transaxle [Service, Removal & Installation FN4A-El)) >> Oil Cooler Flushing >> Power Flushing >> Back flushing

Back flushing

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the power flushing equipment manufacturer's instructions, connect equipment so the flushing fluid flows in the opposite direction of normal fluid flow.
    Fig 1: Identifying Back Flushing Flow
    G03644755Courtesy of MAZDA MOTORS CORP.
  2. Flush oil cooler/lines until discharge fluid is clean.
    CAUTION:
    • If the cooler can not be properly flushed using recommended equipment, send the radiator out for sublet cleaning or replace.