LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Automatic Transaxle [Service, Removal & Installation FN4A-El)) >> Automatic Transaxle Fluid (ATF) Inspection >> Automatic Transaxle Fluid (ATF) Condition Inspection >> ATF Condition

ATF Condition

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
ATF CONDITION

Condition Possible cause
Clear red Normal -
Light red: pink Contaminated with water
  • Broken oil cooler inside of radiator
  • Poor filler tube installation:
    • Problem could be occurring to parts inside the transaxle by water contamination. It is necessary to overhaul transaxle and detect defective parts. If necessary, replace transaxle.
Reddish brown Has burnt smell and metal specks are found Deteriorated ATF
  • Defective powertrain components inside of transaxle: Specks cause wide range of problems by plugging up in oil pipe, control valve body and oil cooler in radiator.
  • If a large amount of metal specks are found, overhaul transaxle and detect defective parts. If necessary, replace transaxle.
  • Implement flushing operation as there is a possibility specks are plugging up oil pipe and/or oil cooler inside of radiator.
Has no burnt smell Normal
  • Discoloration by oxidation