LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (On-Board Diagnostic (Anti-Lock Brakes)) >> Abs/TCS On-Board Diagnosis >> Active Command Modes Procedure

Active Command Modes Procedure

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When driving, the ABS motor and each valve automatically turn ABS_POWER on, and then each command on. ABS_POWER regulates the power supply for the ABS motor and 8 valves.
  1. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector.
  2. Turn the ignition key to ON (engine off) or start engine.
  3. Activate active command modes using the WDS or equivalent.
    Fig 1: Locating DLC-2 Connector
    G03644440Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals