LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Drive Shaft) >> Drive Shaft Disassembly/Assembly [ATX] >> Boot Band (Transaxle Side) Disassembly Note

Boot Band (Transaxle Side) Disassembly Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pry up the locking clips using a screwdriver.
  2. Pull back the end of the band.
    Fig 1: Prying Up Locking Clips Using Screwdriver
    G03644417Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals