Removal and Installation

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Drain the engine coolant.

Fig 1: Disconnecting/Connecting Heater Hoses From The Heater Core
Courtesy of MAZDA MOTORS CORP.
Disconnect the heater hoses from the heater core.

Fig 2: Disconnecting/Connecting Heater Hose From The Hose Connection
Courtesy of MAZDA MOTORS CORP.
Disconnect the heater hose from the hose connection.
Remove the RH front wheel.

Fig 3: Disconnecting/Connecting Heater Hose From The Hose Connection
Courtesy of MAZDA MOTORS CORP.
Disconnect the heater hose from the hose connection.
To install, reverse the removal procedure.
1. Lubricate the hoses with Rubber Suspension Insulator Lube.