Evaporator Core Orifice: Removal

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Condenser-To-Evaporator Line At Orifice Tube

Courtesy of MAZDA MOTORS CORP.

CAUTION:

Plug all ports to prevent contamination from dirt or moisture.

Disconnect the condenser to evaporator line at the orifice tube. Refer to SPRING LOCK COUPLING .

Fig 2: Engaging Special Tool Onto The A/C Evaporator Core Orifice
Courtesy of MAZDA MOTORS CORP.
Engage the special tool onto the A/C evaporator core orifice.

Fig 3: Removing A/C Evaporator Core Orifice
Courtesy of MAZDA MOTORS CORP.
Hold the special tool T-handle stationary and rotate the special tool body to remove the A/C evaporator core orifice.

Fig 4: Engaging Special Tool Onto The A/C Evaporator Core Orifice
Courtesy of MAZDA MOTORS CORP.
If the A/C evaporator core orifice is broken, screw the end of the special tool into the broken A/C evaporator core orifice.

Fig 5: Removing A/C Evaporator Core Orifice
Courtesy of MAZDA MOTORS CORP.
Hold the special tool T-handle stationary and rotate the special tool body to remove the broken A/C evaporator core orifice.